Technical Information
Small rolling bearings with bore diameters
of up to about 100 mm which have an
interference fit on the shaft or in the housing are usually dismounted by means of
mechanical extractors.
The bearings can be
dismounted without getting...
More
Technical Information
Small rolling bearings with bore diameters
of up to about 100 mm which have an
interference fit on the shaft or in the housing are usually dismounted by means of
mechanical extractors.
The bearings can be
dismounted without getting damaged if the
device is applied at the tightly fitted bearing
ring.
With FAG mechanical extractors, the extraction force is usually applied by means of
threaded spindles.
Hydraulic pressure tools
make the job easier in some cases.
Larger bearings are usually dismounted
using the hydraulic method or induction
heating devices.
In this TI the fields of application and the
operation of the FAG mechanical extractors
are described.
Apart from two-, three- and
four-arm extractors and a hydraulic pressure tool, special extractors are described.
Rolling Bearings
TI No.
WL 80-48 E
FAG Mechanical Extractors
April 1999
Less